Smith & Associates
Korodur Industrial

Home Feedback Contents Searchhoneybaked hams

Smith & Associates can reduce the amount of USDA red tape problems, call us now 616-786-3980!

Cut the Red Tape
Call 616.786.3980
Fax  616.786.0299

Home
Up

honeybaked hams, gourmet hams


KORODUR Industrial Floors
KORODUR
are approved in every branch of industry

Since 1936 about 160 million square meters (as of January 1990) of cement-bound KORODUR hard aggregate screeds have been installed in the United States and overseas. We have contributed to the high standards of the industrial floor market. Thus today KORODUR is represented in all 5 Continents with production facilities both at home and abroad. We have also established a world-wide network of services and planning. We place at your disposal our know-how and experience in the field of industrial floorings.

KORODUR industrial floors are tough, durable, problem-free, physiologically harmless, maintenance-free and neutral in use.

KORODUR floors have amply proven their durability under combined rolling and grinding stresses, thermal shocks, pressure and impact, sliding and rolling of work pieces and plant traffic of all kinds.

Properties of KORODUR Hard Aggregate Concrete Toppings:
resistant to gasoline, oil solvents
highly wear resistant
qualified for any kind of mechanical stress
entirely lift truck resistant
chain tractor proof
waterproof, qualified also in wet rooms
deicer-resistant
non-skid, antislip even in cases of oil spills and in wet rooms
not electro statically chargeable
easy to clean
practically imperishable
economical

Laying Methods of KORODUR Hard Aggregate Concrete Toppings:
compound floor screed, directly bonded in one-layer and two-layers
floating screed with a separation layer of polyethylene sheet
in one-layer fresh-on-fresh
in one-layer on vacuum concrete
in one-layer on steel fiber concrete

All hard aggregate concrete screeds are carried out in accordance to DIN 18560 part 7 (ZE 55M, ZE 65A, ZE 65KS). The scope of works with hard aggregate concrete screeds is in accordance to VOB ATV DIN 18353.

KORODUR hard aggregates are produced strictly in accordance to DIN 1100.

KORODUR Hard Aggregates:
KORODUR hard aggregates KORODUR hard aggregates are ready-mixed aggregates which correspond to DIN 1100. We are producing materials of all three coating groups, in addition, special materials can also be produced for almost all hard aggregate industrial flooring systems. Test certificates and reports are available. Our hard aggregates are delivered oven-dried in granular consistency according to special grading curves. They are packed in bags of 50 kgs each, and also in bags of 25 kgs and 40 kgs each on special request. Unmixed KORODUR aggregates have an indefinite shelf life. KORODUR hard aggregates are ready-mixed aggregates which correspond to DIN 1100. We are producing materials of all three coating groups, in addition, special materials can also be produced for almost all hard aggregate industrial flooring systems. Test certificates and reports are available. Our hard aggregates are delivered oven-dried in granular consistency according to special grading curves. They are packed in bags of 50 kgs each, and also in bags of 25 kgs and 40 kgs each on special request. Unmixed KORODUR aggregates have an indefinite shelf life.

 

 

Home ] Up ] [ Korodur Industrial ] Surface Hardener ] KOROTAN Floor ] Metallic Floor ] Korodur 0/4 Floor ] Contact Us ]

 

Send mail to webmaster@smithassocs.com with questions or comments about this web site.
Copyright © 1999-2000 Smith & Associates
Last modified: November 18, 2003